Auxiliary of Printing

Printing - Coating

Synthetic thickeners

KEOPRINT E PER

Thickener for printing cotton corrosion and jeans dyed with indigo.

SINTEX PUK

Polyurethane-based synthetic thickener for printing and coating.

SINTEX CA

Synthetic thickener for pigment printing paste preparation. Low sensitivness to electrolytes.

SINTEX EVP

Thickener for cationic acrylic resins.

SINTEX RMF

Mineral-oil free synthetic thickener for printing with reactive dyestuffs.

SINTEX RDE

Synthetic thickener for printing with reactive dyestuffs.

Anti-reducing agents

ANTIRIDUCENTE MN 800

Anti-reducing agent in water solution. Easy soding in automatic colour kitchens

ANTIRIDUCENTE SV 009

Protective agent against dyestuff reduction in dyeing.

KEOX AR

Anti-reducing agent for printing pastes with disperse dyestuffs. Valid liquid alternative to sodium chlorate.

SALE RISERVA LU

Sodium salt of a nitrosulphonic acid. Anti-reducing granules for printing with direct and reactive dyestuffs.

Antifoam agents

DEFOAMER 223P

Defoamer / deareating agent used in printing paste preparations.

DEFOAMER P42

Printing paste foam regulator, with a prolonged action air release in a vast range of temperatures and pH.

DEFOAMER SDW

Concentrated defoamer with strong deareating action; highly dispersible properties, it does not cause stains on printed fabrics.

Antifermentative agents

KEOCID P6

Broad spectrum bactericide. Applicable in all aqueous systems in which the development of bacteria, molds or yeasts may cause problems. It contains formaldehyde donor.

KEOCID P7

Broad spectrum bactericide. Applicable in all aqueous systems in which the development of bacteria, molds or yeasts can create problems.  Formaldehyde- free.

KEOCID R10

Broad spectrum, formaldehyde-free antibacterial, high stability also in alkaline conditions.

Fixing agents

FISSATORE BR

Formaldehyde-free, fixing agent for reactive and direct dyestuffs.

Penetrants - wetting agents

KEOLAN A70

Dioctylsulphosuccinate. Exceptional wetting power in nearly neutral conditions.

KEOLAN FPE 45

High yield wetting-dispersing agent, with deaerating properties.

KEOLAN PM

Silicone-free, wetting, defoaming agent, particularly suitable for large-format printing.

KEOPRINT 18 MG

Dispersing and lubricant agent coinceived to improve printability. Owing to its high dispersing and anti - sedimentation power, it improves printing avoiding cylinders occlusion and providing them better washability properties.

PENETRANTE PNB

Completely miscibile penetrating lubricant. Due to its strong lubricant action, It makes penetration into fabrics easier  without compromising sharpness even on particularly difficult items  (velvet, pile).

PENETRANTE 5010

Completely miscible penetration, lubrication agent, suitable for difficult items.

KEOPRINT OIL 50

Antitacking product to be added in all the pigment pastes and lacquers. Excellent as leveling agent in printing pastes for acid dyestuffs on lycra, polyamide and nylon.

Products for printing machines

INCOLLANTE NP18

Non-permanent water-soluble polyvinyl alcohol-based bonding agent; highly suggested for fabric anchor on rotary printing carpets and tables. Highly concentrated product.

ADESIVO SPRAY

Permanent stick spray for printing tables and ink-jet carpets. Environmentally friendly since it does not contain CFCs. Practical use in handy spray cans.

ANTIADESIVO SPRAY

Anti-adhesive spray for printing tables. Environmentally friendly since it does not contain CFCs.

SOLVENTE KFX

Properly conceived for a perfect solubilization in printing acid dyestuffs dissolving process. Environmentally friendly product, it does not contain thiodiglicole.

KEOPON EDM

Blends of low toxicity products for the complete removal of permanent adhesives on printing carpets, rotary presses and tables.

KEOPON AL 100

Solvent-based detergent for flat and rotary printing tables, carpets, rotary presses. It allows permanent adhesives perfect cleaning; it is also environmentally friendly, avoiding the use of sodium hypochlorite and solvents such as ethyl acetate.

LAVANTE CQ

Alkaline cleaner suitable for screens, cylinders and printing tables washing, particularly suggested for pigment pastes removal.

LAVANTE LPT

Blends of cleaning agents and solvents for screens, cylinders and printing tables washing.

REMOVER ECO

Ecological remover for printing carpets, table and rotary press adhesives. Non-flammable, non-hazardous to the environment.

Soaping agents

KEON BSD

Dispersing sequestering agent for reactive vat, sulfur dyestuffs soaping.

KEON ST5

Hardness sequestering agent, no influence on dyestuffs containing metals in their molecule. Dispersant phosphorus-free, dispersing agent. Excellent soaping agent of reactive dyestuffs.

KEOPON CS

Soaping agent after dyeing/printing. It preserves white substrates. Particularly suitable for acid dyestuffs.

KEOPON RES

Preserving detergent for prints soaping with acid dyestuffs on wool, silk, nylon and lycra. Excellent preserving effect on white substrates, especially on lycra.  It can also be used for reactive agents and indanthrene dyestuffs.

KEOPON SL

Preserving, solvent-based detergent for printing soaping with acid dyestuffs on wool, silk and nylon. It can also be used for reactive agents and indanthrene dyestuffs.

KEOPON SETA

Soaping agent after dyeing/printing.

KEOPON SRD

Foam-free, soaping despersing agent.

Whites - covering laquers

KEOPRINT BIANCO EL

Opaque white for printing on elastic fabrics ( nylon, lycra, knitted fabrics). Excellent printability, in flat printing as well, with 72 wires cheesecloth or 125 mash cylinders.

KEOPRINT BIANCO SE

Particularly elastic opaque white for nylon, lycra, knitted fabrics printing. Good printability, in flat printing.

KEOPRINT BIANCO E SIL

White with soft handle, mainly conceived for printing on light items in silk, wool, acetate and their blends in combination with acid dyestuffs. Suitable for both flat and rotary printing. Steaming at 102 ° is sufficient to obtain good fastness.

KEOPRINT BIANCO RI

White with soft handle printing especially on polyester, acetate and cellulose fibers. High dispersion product.

KEOPRINT BIANCO RI LIQ.

White, soft handle for printing, stockable in tank. For use in printing, addition to a clear such as SINTEX CA is suggested.

KEOPRINT 2008 - 4500

Opaque lacquers to be mixed with pigments for a coloured effect. Suitable for coloured "reserve" printing with reactive, acid and disperse dyestuffs. Very soft hand and elastic film, suitable to be applied also on knitted fabrics (jersey, lycra etc.).

Puff - swelling embossing effects

KEOPRINT PUFF V

Swelling laquer with three-dimensional elastic -plastic effect. It can be printed in combination with acid dyestuffs. It may be mixed with normal pigments for a coloured effect.  Particularly elastic film, its use is suggested also on knitted fabrics and lycra. Fixation by steaming.

KEOPRINT PUFF PO

Lacquer swelling with three-dimensional elastic -plastic effect.  It may be mixed with normal pigments for a coloured effect. Particularly elastic film, its use is suggested also on knitted fabrics and lycra. Fixation by polymerization.

KEOPRINT PUFF PC

Excellent swelling laquer with three-dimensional elastic -plastic effect. It may be mixed with normal pigments for a coloured effect. Particularly elastic film, its use is suggested also on knitted fabrics and lycra. Fixation by polymerization.

KEOPRINT PEACH

Swelling laquer with peach or chamois colour effect. It may be mixed with normal pigments for a coloured effect. It produces a particularly soft and elastic film.

Glues ( foils - glitter - metal powders)

KEOPRINT GOLD MN

Binder for metal powder printing, suitable for all kind of fibers. It does not alter metal powders brilliance. Suitable for both flat and rotary printing.

KEOTECH TL - GTO

Thermoadhesive base for cards transfer with metal effect. Product containing polyamide powder. Applicable for blade or cylinder coating.

KEOPRINT TRM

Elastic compound to be used in combination with KEOPRINT WHITE EL to reduce coating effect. It can be mixed with pigments for a coloured effect and used as a thermoadhesive base for cards transfer with metal effect on stretch fabrics.

KEOPRINT GLITTER L

Elastic binder for glitter powder printing.

KEOPRINT STAR

Binder for glitter powders. It may be mixed with pigments for a coloured effect. Suitable for cellulose fibers, polyamide, polyester and their blends printing, in combination with acid, reactive and disperse dyestuffs. Highly resistant, soft and elastic film.

KEOPRINT FLOCK

Binder for dust flock. It can be used on any kind of fabric, it gives flock high strength without altering the soft touch of fabrics on which it is applied.

KEOTECH TRANS 3020

Thermoadhesive base for cards transfer with metal effect.Totally formaldehyde-free. Drying temperature of 100-110 ° C max.

Neutro pigment pastes

RESINA E 9010

Printing pigment compound. Soft and plastic feel.

KEOPRINT OPAC

Opaque paste applicable on all textile fibers. Very soft hand.

KEOPRINT DISCHARGE

Pigment corrosion printing paste for substrates dyed with reactive or direct corrosible dyestuffs. Applicable on 100% cotton fabric. It needs Rodite Z addition during printing paste preparation.

KEOPRINT ED

Paste for devorè simulation effect, recommended on silk, wool, polyamide and their blends. It can be used on printed fabrics with acid dyestuffs to increase colour shades.

KEOPRINT BASE RE

Basic neutral paste for stable pigments preparation in combination with reactive dyestuffs.

KEOPRINT EPT

Ready-to-use compound for pigment printing on all kind of fibers. It allows to obtain very good hand printing. Addition to white pigments is suggested in order to reduce their covering effect without changing hands.

KEOPRINT NEUTRO SC

Neutral product to be pigmented with acid dyestuffs to obtain dischargeable high definition prints on silk, wool, nylon and lycra.

KEOSCRIPT

Specific compound allowing to abtain, by creasing the item, a very strong writing white effect. Rehearsing to reverse the article treated, it restores fabric its initial appearance. High fastness to household washing.

KEOPRINT LY

Neutral compound for pigment printing on lycra and elastic fibers. For colouring, just add pigment dyestuffs. Particularly soft and elastic films.

KEOPRINT ACR

Neutral compound for pigment printing on acrylic and elastic fibers. For a colouring effect, just add pigment dyestuffs. Particularly soft and elastic hand.

KEOPRINT DELAVE' serie

Printing paste for a faded effect on cellulose-based fabrics.

KEOPRINT LEATHER

Neutral compound for printing on leather, synthetic leather, PVC, PET, nonwoven fabrics and newly conceived materials. It creates a translucent, firm and tenacious film that can be pigmented with excellent fastness. It can be supplemented with  (TiO2 ) fillers to get an opaque effect.

BIOSSIDO LIQUIDO

Micronized titanium dioxide dispersion (conc. 60%).

NERO FILETTO SC

Black pigmented paste for a high definition print on silk, wool, nylon and lycra. Very soft, excellent printability.

NERO FILETTO RESIST

Black pigmented paste for a high definition print on cotton viscose in combination with reactive dyestuffs. Maximum printability, very soft hand.

KEOTECH TP 10

Polyurethane resin in an aqueous dispersion creating a transparent, strong and tenacious though not sticky film.

KEOTECH SIL

Neutral pigmented paste, allowing to obtain a silky-slippery hand. Applicable for  blade or rotary coating.

KEOGLOSS L

Ready-to-use printing paste for glossy effects, suitable for all kinds of fabrics, in both flat and rotary printintg. Very brilliant and transparent film. It may be mixed with pigmented dyestuffs for plastic coloured glossy effects.

KEOTECH WAX

Polyurethane resin in aqueous dispersion. A- ready-to-use product for "air" coating. It gives fabrics a full and soft hand, highly resistant even after washing at 40 ° C.

KEOTECH SOT

Compound of resins and waxes. It gives fabric a full, soft, round hand and a slightly water repellency.

KEOTECH K2

Water-based polyurethane compound. Suitable in textile printing for two-tone effect.

KEOTECH FOB

Fluorocarbon resin aqueous dispersion. It gives printed or coated fabric a good hydro-oleorepellency. It does not require catalyst but when used in combination with this latter, it improves its performance and its permanence to washing.

Pearly - glass effects

GLASS serie

Ready-to-use paste with "glass glitter" effect, printable with acid dyestufffs on silk and wool and with disperse dyestuffs on polyester. Available with gold, silver, green, blue, red and purple effect.

KEOPRINT OLD serie

Ready-to-use product for a gold, stardust effect. It can be used on any kind of fiber. Available with gold, silver, copper and red effect.

KEOPRINT ORO TD

Replacemente product of pastes containing metals for a "gold" effect.The product is environmentally friendly and highly printable. It is particularly suitable for printing on silk, wool, lycra, polyester and acetate in combination with acid  and disperse dyestuffs.  It just needs steaming for its fixation.

KEOPRINT ORO OT

Replacemente product of pastes containing metals for a "gold" effect. The product is environmentally friendly and highly printable. It is particularly suitable for printing on silk, wool, lycra, polyester and acetate in combination with acid  and disperse dyestuffs.  It just needs steaming for its fixation.

KEOPRINT ORO RE

Replacemente product of pastes containing metals for a "metallic gold" effect. Recommended for printing with reactive dyestuffs and indanthrene on cotton and cellolosic fibers. Environmental-friendly and highly printable product, il allows a strong fastness even on even in wet-on-wet printing.

KEOPRINT RAME

Replacemente product of pastes containing metals for a final "metallic copper" effect". The product is environmentally friendly and highly printable. It is particularly suitable for printing on silk, wool, lycra, polyester and acetate in combination with acid and disperse dyestuffs.  It just needs steaming for its fixation.

KEOPRINT ROSSO 21

Replacement product of pastes containing metals for a "red" effect. The product is environmentally friendly and highly printable. It is particularly suitable for printing on silk, wool, lycra, polyester and acetate in combination with acid and disperse dyestuffs. It just needs steaming for its fixation.

KEOPRINT PERLA FINE

The product allows to obtain pearlescent effects on white and dyed fabrics substrates. Coloured with pigments.

KEOPRINT PERLA MID

Neutral paste for a very brilliant " pearl " effect on all fibers coloured with pigment dyestuffs. The product is environmentally friendly and highly printable. It is particularly suitable for printing on silk, wool, lycra, polyester and acetate in combination with acid and disperse dyestuffs. It just needs steaming for its fixation.

KEOPRINT ARGENTO 1

Ready-to-use paste with silver effect without metal particles. Highly elastic film. It can be printed on lycra and polyamide for swimsuits.

KEOPRINT ARGENTO MID

Replacement product of pastes containing metals for a final "silver" effect. The product is environmentally friendly and highly printable. It is particularly suitable for printing on silk, wool, lycra, polyester and acetate in combination with acid and disperse dyestuffs.  It just needs steaming for its fixation.

KEOPRINT ARGENTO RE

Replacemente product of pastes containing metals for a silver" effect. Recommended for printing with reactive dyestuffs and indanthrene on cotton and cellolosic fibers. Environmental-friendly and higlly printable product, il allows a strong fastness even in wet-on-wet printing.

KEOPRINT ALLUMINIO

Ready-to-use paste with silver effect metal particles (aluminium). Highly elastic film, it can be coated on any kind of fabric.

REFLEX serie

Ready-to-use paste with iridescent couloured effect. Available in iridescdent gold, silver, green, blue, red, violet and orange.

Various products and special finishing

CATALIZZATORE KM

Catalyst suitable to increase pigment resins cross linking, also decreasing their polymerisation temperature. It does not cause any change in pigment printing paste reology or stability.

KEOPRINT 3D PES

Printing paste allowing a relief or embossed effect on polyester fabrics. The 3D effect is stable over time and is water resistant to wet and dry washing.

KEOPRINT DEVORE'

Product to be added on guar-based printing paste in order to obtain a devore’ effect on polyester-cotton, polyester-viscose, silk-cotton items.

PASTA CREPON

Printing paste to be used on not mercerized cotton in order to obtain a "craquelè" effect.

KEODYE WS

Dispersing agent for printing paste preparation with powder disperse dyestuffs.

KEOPON 1870

Pigments detergent - dispersing agent in printing paste. It also keeps cylinders clean during processing due to its high anti - sedimentation power.

RODITE Z

Recommended use with KEOPRINT DISCHARGE in order to obtain a corrosion effect on direct and reactive dyed substrates.

REDUXTIL X

New-generation eco-friendly reducing agent for discharge printing of both silk and wool. It does not cause whitish halos on the outer edges of printed areas.

REDUXTIL L50

Reducing agent used in corrosion printing of both acid dyestuffs on silk and wool, and of Indanthrene on cellulosic fibers. It replaces traditional powder products, considering the numerous advantages of its liquid form.

KEOFIN BIC

Finishing against dirt. It changes the treated fabric surface, though not affecting handle, facilitates dirt removal, of ink in particular, rubbing with a cloth dipped in water.

KEOFIN APL

Anti-pilling finishing. It changes the treated fabric surface, though not affecting handle, and slowing down pilling tendency.